|Home||» Products||» Sand/Shot Blasting Machines-Pneumatic||» Belt Conveyor Type Abrasive Blasting Machine|
A Common Rubberized perforated Belt Conveyor is provided at inlet & outlet of the cabinets to convey the job inside the blasting zone. Both side 1000mm conveyors will be provided for job loading/unloading. However 150mm vestibules, after & before blasting cabinet entry & exit side, will also be provided to avoid media spillage. Job Loading height will be 900mm from FFL. Below the Conveyor Stand a hopper like shape will be provided, a screw conveyor with end shaft, bearings will also be provided to convey the media, which fall in the hopper, to the center of the cabinet.
Belt thickness : 12mm thk
Belt width : 500mm
Endless length : 6mtr approx
Drive of Belt Conveyor : 1HP with Ele.Motor & Gear Box (1No.)
Speed of Belt Conveyor : 0-1mtr per minute (to be decided as per final production)
End Rollers : Dia-170mm with suitable bearings & Tensioning arrangement
Belt Tensioning : Provided at Unloading End
Inlet Vestibule : 100mm Ht & 150mm Length
Inlet Belt Conveyor Length : 1000mm Loading Side
Outlet Vestibule : 100mm Ht & 150mm Length
Belt Conveyor Length : 1000mm Un-Loading Side
Nozzle Reciprocation : Qty.- 1No.
Reciprocation : Pneumatic Cylinder (Reverse/Forward)
Stroke : 500 mm Max
Stroke Adjustment : By Limit Switches
Control : By Speed Control Valve
Suction Blast âYâ Gun : 02 Nos. (Provision for 02Nos. Extra Guns will be provided)
Blasting Hose : 3/4" suitable length as per GA
Nozzle : 10 mm TC Lined
Injector : 4 mm
Blasting media is carried from the cabinet hopper to the re-claimer by the suction effect of the exhaust fan mounted at the top. It air washes the blasting media and carries fines and air laden dust into the fabric bag housing.
Due to cyclonic action, the heavy particles are collected in the bottom, where they are sieved by an operated vibrating screen. The sized abrasive is transferred into the abrasive storage hopper for recycling and debris can be removed manually through inspection hole provided for this purpose.
Abrasive Storage Capacity : 42 Ltrs. [1.5 Cft.] approx.
FABRIC BAG DUST COLLECTOR :
After passing through the Re-claimer, the dust laden air and finely broken down abrasive is drawn into the fabric bag dust collector. The dust is deposited inside the filter bags. The resulting clean air is exhausted into atmosphere to keep the environment clean and friendly. Fabric bags of dust collector shall have the system of manual bag shaking arrangement.
The dust collector housing shall be fabricated from 2.0 mm thick MS sheets suitably supported by angles and channels. The noise level shall be below 85 dBA.
Dust emission level to atmosphere through fabric bags shall be less than 150 mg/N cubic mtr.
Fan Motor : 3 HP, 415V/3P/50 Hz.
Filter Bags : 20 Bag [15 sq mtrs]
Bag Shaking : Motorised 0.5HP Gear Motor
Air Blow Gun :
One No. outside the cabinet of orifice 1.5 mm is provided on gun reciprocation to clean the Job.
Safety interlocking :
Safety interlocking is provided so that blasting does not start when the door is are open.
Tele Fax No. 0129-4083366 / 4086633
Mobile - +91 9718383333 / 8527923333
Email - email@example.com
Jodhpur Works : Khasra No. 41/5, Suraj Nagar, Guda Road, Jhalamand, Jodhpur - 342 013
Mobile - +91 8527163333
Pune Regional Office : 4, Survey No. 81/2, Dangat Indl Estate, NDA Road, Near Agrawal Godown, Shivane, Pune - 411023
Mobile - +91 9899478333